Latest 3D printable toy Robot

Thanks! Here is the final painted version! https://www.youtube.com/watch?v=2E_py6pFYJA

I also printed it out really large! https://www.youtube.com/watch?v=NeF-ZXPQgjg&index=9&list=UUMwksSw23LmGH-VB-Rr_iEg

You can get one like mine from Gear Best for around 200 US dollars. The hard part is not really buying a printer... The hard part is getting it to work and getting good results out of the prints. You need to study your machine, learn the basic settings but most importantly learn how to fix and change the parts. The Tevo Michaelangelo is a pretty good printer but just like any other you will run into problems, filament jams, parts break over time and sometimes the machine will be broken on arrival. If you buy from Gear Best the customer support is good so they will send you spare parts if it breaks within the warranty or is gets to you broken.

Yes! Exactly! There is a very steep learning curve but once you get a system down or method then you finally start getting some good prints. Make sure you get a printer with very good cooling and that has very little assembly needed for your first printer... getting something like a Pruza or high-end printer as your first one may be a little too much to handle unless you are used to building computers or Tamiya hobby grade RC vehicles.