Mold anatomy penis 3D print model

Unleash your creativity with our 3D Mold Kit!

Turn ideas into art with this exclusive kit featuring two unique molds for 3D printing. With these molds, you can create rubber molds and craft amazing items like: Custom candles Handmade soaps Decorative pieces in resin or cement

The bold and authentic designs – representing a penis and a vagina – are perfect for those seeking originality and impact in their creations. Whether for personal use or to impress your customers, this kit is the ideal choice for innovating in the world of crafts.

Get yours now and start creating unique pieces full of personality

Step-by-step process for creating molded items

1️ Print the 3D mold: Start by printing the desired mold. Make sure the print is well-done and includes all necessary details.

2️ Sand the printed mold: After printing, carefully sand the mold to remove imperfections and ensure a smooth surface. This is essential for a perfect finish.

3️ Lubricate the printed mold: Apply a thin layer of lubricant to the mold. Avoid excess application, as it may hinder the process. Lubrication makes it easier to remove the rubber mold later.

4️ Prepare the rubber with the hardening catalyst: Mix the rubber with the hardening catalyst according to the manufacturer's instructions. Make sure the mixture is well-blended.

5️ Pour the rubber into the mold: With the mold already lubricated, pour the prepared rubber into it. Be sure to fill in all the mold's details.

6️ Wait for it to dry and remove the rubber mold: Allow the rubber to dry completely. Once hardened, carefully remove the rubber mold. You now have a rubber mold ready for use!

7️ Unleash your creativity: With the rubber mold in hand, you can create candles, handmade soaps, or decorative items using resin or cement. Simply pour the desired material into the rubber mold.

8️ Finish your item: Once the material is dry, remove the item from the rubber mold. It's done! You've created a unique piece that can be sold, gifted, or used for decoration.

3D printing settings

Slicer Software: CHITUBOX V1.9.3 Layer Height: 0,05 mm Bottom Layer Count: 8 Exposure Time: 2,5 s Bottom Exposure Time: 80 s Transition Layer Count: 5 Transition Type: Linear Waiting Mode During Printing: Resting Time Rest Time Before Lift: 0 s Rest Time After Lift: 0 s Rest Time After Retract: 0,5 s

or

Slicer: Creality Print • Quality: layer height = 0.2 mm • Seam: seam position = aligned • Walls and surfaces: Only one wall on top surfaces = yes Only one wall on first layer = no • Strength: wall loops = 2 • Infill: sparse infill density = 15% • Support: type = tree • Material: temperature = 210 ºC plate = 50 ºC