Luftwaffe WWII Aircrew 3D print model

A set of 3 posed crewmembers, Designed for scales of 1/35 & higher, and for resin printing.
Thin parts are used, so for smaller scales, please use the lowest levels of antialiasing, and image blurring to avoid losing detail. For larger scale prints, this may not be an issue.Note:The models are real world scale and stand around 1m75 tall. Use the scale entry in your slicer to size them correctly without needing to know the dimensions of each model:-Get your scale factor by dividing 1 by the scale. IE 1/32 1 divided by 32 which is 0.03125 (so 3.125cm = 1m). Substitute 32 for any other scale.Since most slicers use mm as their unit, you need to multiply this by 1000, & get a factor of 31.25mm = 1m To make this work as a percentage, we multiply again by 100 to get 3125.00. So Enter 3125% as the scale of the figure.

If you know the height: of a model is 1.75m then using the above calculations, you will see that the scale calculation gives you a model 54.687mm high at 1/32 scale as expected.