Raven Swordmistress by SPARX 3D print model

WARNING nude body parts are shown in a number of the picture, dont look if offended

Got a couple requests to add an NSFW version of the Kate Babooshka, definitely NO . . . however as a compromise I have sculpted the Raven figure based on the book covers and Chris Achilleos art to include NSFW parts.I have deliberately changed the torso pinning so as not be able to swap torso’s or Heads with the Kate Babooshka model . .THEREFORE, ALL OF THE PARTS TO PRINT A MODESTY OR NSFW MODEL AND MORE ARE INCLUDED IN THIS DOWNLOAD

You will need to print two left hands if requiring the cape to remove and be replaced with a hand no cape.Both heads can be used with or without the cape.

As I plan to print this model in a mirror image (see last Image) I have included a second base that will allow this without reversing the Raven Logo.

Model in “Heels arm above head” 300mm or with base 317mm height.

Raven parts2 Sword Arms1 Left Hand1 Left Hand and Crow1 Right Boot1 Left Boot2 Heads (plus head pin)6 Upper Torso5 Lower Torso2 (Left & Right) pieces Cape2 Base’s1 Sword blade2 Head stands1 Torso stand

28 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print, make, enjoy.

3D PRINTING SETTINGS

Resin Printing;Hollow 2.40 Raft 100%Head, Boots & Left Arm

Hollow 2.70 Raft 100%Upper & Lower torso

DO NOT HollowLeft hand

FDM Arm, Head, hand, sword blade,80% fill 0.12 speed 40Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.Look at the picture of how to assemble parts, so that you construct and paint separate before joining should you wish.