LITOFANIA ARCH SUPPORT 3D model

Support made to place Litofania prints made in 60° Arc to a maximum width of 120mm and place an additional USB connection to place a light bulb with that terminal. The hole for inserting the USB cable has an internal diameter of:

Width: 10mmDepth: 18mm

The lithophany I make them by the web tool https://tool.itslitho.com/ and print it vertically with an adhesion to the Balsa bed. The parameters to set the photo I attach them in the photos of this post.

Parameters of Lithophane (Lithophane)Width: 125mmHeight: As desired.Depth: 19mm

MODEL UPDATE (v2):The rear of the model was closed. A circular opening was placed so that you can place your USB connector cable bent through there.

3D PRINTING SETTINGSBase Diameters:

• Height: 40mm
• Width: 135mm
• Depth: 70mm

Time: 3 hours 30 minutes printing.Material: PLA+ eSun.Printer: Ender 3 Pro.Horizontal expansion: 0.0Bed temperature: 50°.Nozzle temperature: 210°.Adhesion to plate: Skirt.Unsupported.