Ray, the Manta Ray

Ray, the Manta Ray
3D MODEL DESCRIPTION
Ray is very inspired by the idea of taking over his father’s mantle as the manta of all Rays.
● This STL file is recommended for FDM Printers!
● 3D Printing Time Based on Ender 3: 01 Day 04 Hours 34 Minutes (will vary accord to you printer
model)
● Approximately Length: 16 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
● Line Width/ Nozzle: 0.4 mm
● First Layer Line Width: 0.48 mm / 120%
● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s
(All the other layers on Bambu Lab)
● Recommended Initial Layer Height: 0.16 mm
● Recommended Layer Height: 0.16 mm
● Recommended Perimeters/ Walls: 3.
● Recommended Infill (%): 10% (Gyroid)
● Needs Support: No.
● Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!