This is a Rubiks cube like 12 ball, ball puzzle. It has a pin that you have to hammer in and won't come back out after it is hammered in. You might want to print pin in PETG because it needs to be strong. The main body of this puzzle should print without supports provided the side with the pinhole is oriented down well printing, the balls for the puzzle will need supports or a brim and for strength the pin should be printed on its side with supports. Make sure to print 6 balls in one color and 6 in another, as shown in pictures. The puzzle takes eight 5 x 2 mm magnets, these make it smoother, but are optional. It is quite easy to solve once you figure it out, but surprisingly difficult to figure out. This is around a the six out of 10 on the difficulty scale. Because any of the paths can have 2,3 or 4 balls in them. Solved state is three balls in each path all of the same color in one path and the same color across from each other as shown by the picture.
Modle link: https://www.cgtrader.com/3d-print-models/games-toys/puzzle/puzzler
Comments