This print solves the problem of little bits of crumbs or debris falling into cracks in between your counter and stove. This is a kitchen stove to counter threshold/gap cover. This can be printed in PLA, PETG (for better heat resistance) or TPU (for flexibility) please make sure that your filament will not melt under the temperature of the outside of your oven before printing this.
Pieces include a cap for either side to make it look nicer and a middle peace for the actual length. The pieces are joined together with dovetails, the caps have dovetail on one side and the middle piece has a dovetail on both sides. To install your pieces, first make sure there is no extra filament debris in the dovetail joints, then peace all of the printed pieces together, well they are laid down on the counter and pushed them into place. If the fit is not tight enough you can use some double sided tape to stick it down. The middle piece comes in sizes of 50mm, 100mm, 165mm, 200mm and 300mm (it should be noted that these measurements are the length of the piece not including the dovetail used to join them together). The piece that actually slots in to the crack is 4 mm thick.
If you need different dimensions for either the piece that slots in between the oven and the counter or a different length of middle please contact me, I will be happy to make those changes and upload more files to your specifications.
Model link: https://www.cgtrader.com/3d-print-models/house/kitchen-dining/kitchen-gap-cover
Comments