These are glow stick building connectors. Make your ideas come to life and the best part is when you're done it will glow. All you do is slide the glow stick into one of the connectors holes and build. These are great for parties with children, they can build whatever they want with the glow sticks you already have. All you will need are 5mm in diameter glow sticks (not included) and as many files as you want to print.
These files are printable with a reasonably calibrated printer and with PLA or PETG (for extra strength and durability). There are two versions of each piece one with a 0.1 mm tolerance and one with a 0.2 mm tolerance, for you to choose how tight you want your glow sticks to connect. Depending on how you print your connectors and how well your printer is calibrated, you may have to take sandpaper or a knife to the inside of the hole to get the glow stick to slide all the way in.
File list as shown in pictures (each listed file has two versions one with a 0.1 mm offset and one with a 0.2 mm offset):
- Normal connector
- T joint connector
- T joint with offshoot connector
- 6 axis connector
- 6 plane connector
- 8 plane connector
- 10 plane connector
- 12 plane connector
Modle link: https://www.cgtrader.com/3d-print-models/games-toys/toys/glow-stick-building-connectors
Comments