FILE: https://www.cgtrader.com/3d-print-models/miniatures/figurines/cupid-and-psyche-statue-in-a-romantic-classical-enivonment
Cupid and Psyche are depicted kissing inside a heart-shaped cave, draped in fabric, and surrounded by elegant classical columns.
You will just need to add support, push the slice button and then print (I used tree slim support of Creality Print). It's very easy to print, but remember to carefully remove the supports around the hands and Cupid's wings. After removing the supports, you can use a standard hairdryer to modify as you prefer the position of the wings, arms, and columns, but only if you've printed it in a material like PLA that allows for such adjustments in post production (nerdy trick!).
The best parameters I found for this (using Sunlu Marble PLA with a Creality K1 Max and Creality Print slicer):
Layer Height 0.10mm,
infill density 15% with grid pattern,
Print speed 60mm/s,
Tree Slim support Touching Build Plate, p
rinting temperature 220°C,
Build Plate Temperature 70°C,
Retraction Enabled with wipe lenght of 2mm and retraction speed at 40mm/s.
Best wishes to all the 3D printers out there in the community! Keep up the amazing work, and may your prints be flawless and your creativity boundless. Happy printing!
Comments