Face Mask for covid-19 virus protection Free 3D print model

Free Face Mask for Corona Virus / Covid-19 Protection for public usage.

Two-part face mask. Front part for fastening with elastic or rubber band by the four connectors. Nozzle part for securing the air filter to the main mask body. The two parts snap together and hold the filter.

Needs the filter to be effective. A microfibre cloth filter or any material with a particle filter capacity must be cut to size and installed. It will have greater protection depending on the type of filter to be used. Air will enter through the holes from the front of the mask, make sure the fit around the face doesn't gaps.

The original Houdini file the mask was procedurally made in is also included if you need to change the shape to a greater degree to fit the face of a person. The free Houdini Apprentice program can be used to edit the original file and re-export OBJ's to different shapes. I'm still in the process of learning the software, so the procedural network isn't as lean as it probably could be, takes quite awhile to cook some of the nodes to create the meshes.

High resolution: OBJ Lower resolution: OBJ, STL, 3MF, AMF, and Mix

This is not an approved mask and will be used at the risk of the person who prints it. The author is not responsible for possible damages or adverse causes.