Japanese Style Boathouses - Ine no Funaya Free 3D print model

Hey! Thanks for stopping by and I hope you like it!

The Houses and Roofs were made separately to reduce the amount of filament used and to facilitate the addition of lights inside the houses.

The Interior of the houses have sufficient connected space within to add LEDs.

Modelled with BlenderSliced using Ultimaker CuraPrinted on the Creality Ender 3Filament used was Tesseract White Filament

Feedback will be greatly appreciated and I'm willing to make changes/fix flaws. This is the first design I've uploaded online.Please let people know in the comments if you've had success with faster/easier methods of slicing as I haven't had the opportunity to experiment much in that area.Like and Share if you find it worthy, it really helps!

Visit my Instagram for more pictures and videos!Please credit the design if you upload your make, I'd love to share it.https://www.instagram.com/alcatraz7007/?hl=en

Thank You!

Print Settings

SCALE DOWN THE STLs TO YOUR PREFERRED SIZETHE PHOTO OF MY MAKE HAS BEEN SCALED DOWN TO 25%

For the BaseLayer Height = 0.3 mmNo SupportsMinimal Infill is sufficient Try to maintain the speed at default so that the stilts don't breakDecrease the Top and Bottom Filled Layers to reduce timeTotal Printing Time = 7+ Hours

For the HousesLayer Height = 0.1 mmSupports Required Enable Print Thin WallsTotal Print Time = 11+ Hours

For the RoofsLayer Height = 0.1 mmEnable Print Thin WallsSupport Required

Updated 19/08/2021Added Platform STL to support a battery/electronics behind the houses to the bridge.