3D Print Ready Desktop Filament Holder Free 3D print model

Handy3dzz Desktop Filament Holder

Please read this text before printing for designs, descriptions, advantages, dimensions, weight, print settings and warnings.

Designs/Descriptions/Advantages

• You can place the cylinder model of the second file inside of the model of the first file. In this way, you can finish printing at one time.
• You can use multiple filament rolls on the platform that your 3d printer stays on by printing this filament holder as many as you want.
• As it is(without scaling), you can use it for 1 kg(2.2 lb) filament rolls or less.
• Use directional scaling for bigger filament rolls. In order to use the filament holder with 5 kg(6 lb) rolls, you can increase scale factor to 2 or 200 % in lateral direction for the first file. The second file should be printed with same scaling factor in vertical direction for this purpose.

Print Settings & Warnings

• Place the filament roll as it is shown in the photos to decrease friction between the filament roll and the cylinder of the filament holder, not the reverse.
• It may need extra effort for fixing if you are planning to use it on a frictionless surface. (A duct tape would be the simplest solution).
• You don’t need utilization of support while printing if don’t have adhesion problems. However, if you have adhesion problem, you can use both exterior and interior brims. Also, high first layer temperature can be helpful.

Please mind

• It is free, you’re welcome :) Not only because it is probably your first useful print with your 3d printer, but also to promote other models on >>>handy3dzz<<< that you can purchase. Check plenty of useful stuff on >>>handy3dzz<<< that you can use in your work, home, garage or laboratory. All of them will save your money and you can print infinite amounts. Even if you are able person who knows how to design them, don’t waste days and weeks that otherwise, you can use on your precious projects. Just buy from Handy3dzz. New handy stuff will be added day after day. Therefore, please follow on twitter(http://bit.ly/3CBXXdm) and instagram (http://bit.ly/3uaZXWr).
• Please let us know if you have any inconvenience with the product so it can be fixed and the fixed version will be sent to you immediately.
• Please note that the model is printed and tested with awful and cheapest 3d printers and PLA filaments with mediocre printing settings.
• This file is an asset in memory of your 3d printer, therefore, treat it accordingly.