These are the gloved hands for my 'Sexy Anime Ninja' model. Since the hands are the most delicate and difficult part of printing the 'Sexy Anime Ninja' model, I am providing them here to try out as test prints. If you can get a good print of these at the default scale (1/9 scale), you will have no problem 3D printing any of my highly detailed ninja models. Plus, you will already have the hands, so you can snap them on the Ninja model or choose to 3D print the complete ninja with the hands already attached.

If you are planning to print the Ninja model, print this at 100% scale. Otherwise, scale them at least 300% for some interesting miniatures.

It's a little bit easier to print these separately from the Ninja base. It's less work to print them already attached, and does usually work alright for 1/9 default scale or larger. However, by printing the hands separately, you have more control. You can print them at the highest resolution your printer supports. Then you can print the ninja body at lower resolution for a much faster result. Plus, you don't risk wasting a print if you have a problem with the hands or tiny shuriken tips. The hands print very nice at 0.1 mm and the body at 0.2 mm or better.

Caution, you need to be very careful when removing the supports around the fingers and shuriken, but with care they come out in amazing detail. For best results, scale up