TERMS OF USE:
Commercial Use is OK.
Do not claim this work as your own.
FOR WEB:You must link back to => https://www.cgtrader.com/3dstudiopro
FOR PRINT:
The link to => https://www.cgtrader.com/3dstudiopro on any product pages online.
Copyright remains with me.
I hope you enjoy my Work.
CONDICIONES DE USO:
Para uso comercial está bien.
No reclames este trabajo como tuyo.
PARA TU WEB:
PARA IMPRIMIR:
El enlace a => https://www.cgtrader.com/3dstudiopro en cualquier página de productos en línea.
Los derechos de autor permanecen conmigo.
Espero que disfrutes de mi trabajo.
Quality:Layer Height: 0.15mm
Perimeter:Wall thickness: 1 or 2 mmTop and Bottom layers: 4 or 6
Filling:Fill density: 15%Pattern: Grid
Material: TPUPrinting temperature: 238ºCPrinting plate temperature: 40 or 50ºCEnable retraction: YesEnable retraction in layer change: Yes
Speed:Print speed: 50mm / sFilling speed: 30mm / sWall speed: 40mm / sFirst layer speed: 30mm / s
Displacement:Hairstyle mode: Everything.Z jump in retraction: YesEnable Z jump in retraction: Yes
Refrigeration:Activate cooling: Yes
Support: Yes (Recommended)