Designer case basket 3D print model

It is a small busket designed to put things in it. Fully 3d printable.

Settings:Layer Height: 0.2mm for a balance between quality and print time.Infill: 15-20% infill should be sufficient for a soap case.Wall Thickness: 1.2mm (three perimeters with a 0.4mm nozzle).Top/Bottom Layers: 4-5 layers for strength.Print Speed: 50-60 mm/s for good quality.No Supports: Ensure supports are turned off since there are no overhangs.Bed Leveling: Make sure the print bed is properly leveled to ensure good first layer adhesion.Bed Adhesion: Use a bed adhesive like a glue stick, painter’s tape, or a heated bed at around 60°C for PLA.Filament Loading: Load PLA filament into the printer. Set the nozzle temperature to around 200°C.