Quadro Aero Gyro Turbo - Concept 3D print model

Quadro Aero Gyro Turbo - Concept.

As the name suggests, four gyro turbos, able to work with air or water, or any other fluid of course i the design specs are adapted. these 4 gyro turbos are fit together in another holding cylinder, equipped with a motor and strong fan, or compressed air nozzles. one system must feed the four gyros at the same time, ensuring the same centripetal, inward rotational speed.

i have made a air flow system, so the motor can suck in air, the air is forced into one of 4 chambers, rotated along the gyro slits, rotated inside the chamber with near zero friction, then, when the air is no longer used for rotation and becomes ambient, it can and will leave the chamber, [exactly like a Tesla turbine with slits] under a little higher pressure, on the sides of each gyro holder, serving as the gyro holding stator.

expand on the concept, and use one system consisting of 4, perhaps moving them out of the center, and placing one on each cardinal direction of a drone, creating a centripetal balance for a larger construction that needs these types of gravity for breakfast eating thruster devices. perhaps compressed air is advisable, non explosive, no combustion of any sorts needed to power this device. air will make it go plenty fast. the faster they spin, the lighter the thruster becomes, when in doubt, try it for yourself. plans and all files included, experiment freely.

Thank you for reading, have a nice day.