OZ Racing LM plus Tires 3D print model

Set of the OZ Racing LM wheels model, together with the Pirelli P-ZERO tire, in 1:24 scale.The modeling of the piece is proprietary, it is not a 3D model purchased on the internet, you will not find another like this. The object's detail quality is incredible and will make your miniature even more beautiful.The package contain two set of tires and wheel with 17x8 and 17x10. The wheel has a separate central nut and central thread to facilitate painting/detailing.The images in this listing are renderings of the 3D model, as well as images of the model itself in modeling software. They look great on racing cars of the 90's, like the Ferrari F40.

Measurements - 1/24 - FrontWheel diameter: 17.99 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 21.99 mmWheel width: 8.47 mmTotal width (B): 8.47 mmFull scale equivalent rim: 17x8

Measurements - 1/24 - RearWheel diameter: 17.99 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 21.99 mmWheel width: 10.58 mmTotal width (B): 10.58 mmFull scale equivalent rim: 17x10

For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.