Nascar Wheels from 60s and 70s year plus Tires 3D print model

Set of Nascar wheels model, used in the 60s and early 70s, together with the Goodyear Bluestreak tire, in 1:24 scale.The modeling of the piece is proprietary, it is not a 3D model purchased on the internet, you will not find another like this. The object's detail quality is incredible and will make your miniature even more beautiful.The package contain two set of tires and wheel with 15x9 and 15x10. In addition, it comes with two types of center caps, one open and one closed.The images in this listing are renderings of the 3D model, as well as images of the model itself in modeling software.

Measurements - 1/24 - 15x9Wheel diameter: 15.87 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 25.47 mmWheel width: 9.52 mmTotal width (B): 10.92 mm

Measurements - 1/24 - 15x10Wheel diameter: 15.87 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 25.47 mmWheel width: 10.58 mmTotal width (B): 11.98 mm

EDIT (V2): New files have been added with the central area (where the screws and center cap are) adjusted to the scale.

EDIT (V3): The wheels had their design slightly adjusted to be more faithful to the original model. In addition, they are even deeper, highlighting the tires even more. Only the wheels and the center caps have been adjusted. The tires follow the last design update.

For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.