Lockheed C 141 B Starlifter 3D print model

Lockheed C 141 B Starlifter model for 3d print.

The model is prepared for 3d printing in .stl format. The files are in the archive.zip. The model is divided into parts for ease of printing, you can look at the screenshots exactly how the model is divided. And it has two separation options for small and large printers.

In the package there are two options for the front of the aircraft, before printing, choose which one you need:Base_1-1 or Base_1-2

The model is prepared at various scales: 1:64 Model in this scale has size: 80 cm 1 mm / 31.5 inch 1:72 Model in this scale has size: 71 cm 2 mm / 28.03 inch 1:100 Model in this scale has size: 51 cm 2 mm / 20.15 inch 1:144 Model in this scale has size: 35 cm 6 mm / 14.01 inch 1:200 Model in this scale has size: 25 cm 6 mm / 10.07 inch

I advise you to make the model hollow in your slicer, to save plastic/photopolymer. Also keep in mind if you print on a photopolymer printer, make holes to drain the resin, this is important for high-quality printing.

If you have any questions or difficulties, write to me so that I can help you.

I have attached screenshots of how the model looks assembled, from different angles, but keep in mind that detailed assembly instructions are not attached (perhaps later I will add such instructions and this will be indicated in the description.) therefore, if you have any questions about the assembly of the model, write to me.