JrMania Thunder Wheels plus Tires 3D print model

Set of the proprietary design JrMania Thunder wheels model, together with the BF Goodrich whitewall tires, in 1:24 scale.The modeling of the piece is proprietary, it is not a 3D model purchased on the internet, you will not find another like this. The object's detail quality is incredible and will make your miniature even more beautiful.The package contain two set of tires and wheels, the 19and the 21 set. Furthermore, it has a separate rim, wheel spokes, axle pin, and a separate spinner as well.

The images in this listing are renderings of the 3D model, as well as images of the model itself in modeling software. They look great on vehicles from the 40s, 50s and 60s, such as midsize sedans from Chevrolet, Ford, Chrysler, such as Impala, BelAir, Ford Custom Deluxe, Pickup F1 and F100, among others. Our customers usually use the 19rim composition for smaller vehicles and 21 rims for large vehicles, such as Cadillacs.

Measurements - 1/24 - 19Wheel diameter: 20.11mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 28.11 mmWheel width: 10.05 mmTotal width (B): 11.59 mmFull scale equivalent rim: 19x9.5"

Measurements - 1/24 - 21Wheel diameter: 22.23 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 28.23 mmWheel width: 10.05 mmTotal width (B): 11.12 mmFull scale equivalent rim: 21x9.5"

For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

The wheel spokes must be printed twice, and follow the assembly as per the photos in the ad, one glued to the other in an inverted way.You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.