Generic Suspension Control Arm 3D print model

Generic A shaped suspension control arms. Ideal for upgrading your miniature, whether modernizing the suspension, or for creating your model from scratch, when assembling that famous junk kit.The arms are in 1/24 scale, and can be printed in other scales, but you must pay attention to the holes already present in the STL to hold the other pieces that can make up the set.The purchase of this model consists of two files, the upper control arm (simple) and the lower one (with support for the shock absorber/coilover)

For other scales you can use the scale table below:1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.