Connectors for Oilcooler different scales and scaleable 3D print model

For my Setrab Oilcoolers I made some Hose connectors.

Check out the oilcoolers i made. i print them seperate and use superglue, another option would be to connect them in the slicer software.

I made 6 different styles:

45 deg machined90deg machined45deg bend tube90deg bend tube135deg bend tube180deg tube

If you need an different angle for the connector (or a special design) feel free to contact me and i could add them to this design !!

Scale 1:6 for tubes with the following sizes:0.5mm0.65mm0.8mm1.0mm2.0mm2.6mm

Scale 1:121mm2mm

Scale 1:60.5mm

Printsettings:resin 0.025mm for best results but 0.05mm will work too. the bore for the tube placed downwards to the FEP away from the buildplate for the best result of the bore.

Check out the bundle with the oilcoolers!And if you have questions write me a message and i will answer as soon as possible.

Only for Private Use. 3D files or 3D printed Models could not be given away for free or be sold!