Cable spool Trailer in H0 scale movable spool holder 3D print model

In addition to my industrial cable rolls I made this Trailer (Cable rolls are included !! ) a large wooden one and a modern steel one.

Needed MaterialSteel wire in various length:

• 1x Axis for the Rolls is a 1mm steel wire with a length of 21mm
• 2x Axis for the wheels, 1mm steel wire length is 24mm each
• 2x Axis to move the Spool holder, 1mm length about 1.5mm eachSome string if you want to place the Spoolholder openedIf you want use some Herpa or Wiking car wheels with about 7mm diameter or print the ones I designed.either rim and tire separately or use the combined design.Illumination of the taillights might be added in a later version, so far I had problems printing it, but I kept the file for the frame if you want to test it.

The fwd axis has elongated holes to keep all tires to the ground if the terrain is not flat.the small truck I used for the photos is a model from Herpa. Connection is 9mm above ground and 1mm thickDimensions:Spools:

• diameter: 29mm
• width: 17mm

Trailer:

• width: 26.6mm
• length with spool: 64mm
• height with spool: 39mm
• length without spool: 62.5mm
• height without spool: 25.7mm

Printing:layer 0.05mm80% abs like with 20% flex resin

If you need another height or diameter for the hook feel free to write me after your purchase and I will add it.And when you have questions write me a message and I will answer it as soon as possible.Check out my other designs like signals or cable raceways in H0 scale that fit this model

Only for Private Use. 3D files or 3D printed Models could not be given away for free or be sold!