Alfa Romeo GTAm Wheels plus Tires 3D print model

Set of the Alfa Romeo GTAm wheels model, together with the Michelin Pilot Sport tire, in 1:24 scale.The modeling of the piece is proprietary, it is not a 3D model purchased on the internet, you will not find another like this. The object's detail quality is incredible and will make your miniature even more beautiful.The package contain two set of tires, both 20, but the front wheels with 9.5 wide, and the rear 10.5". In addition, it comes with a separate central nut to be easier when painting, and a tire as well.The images in this listing are renderings of the 3D model, as well as images of the model itself in modeling software. They look great on vehicles from the Alfa Romeo, modern or vintage. The sizes are the same from the original measureaments.

Measurements - 1/24 - FrontWheel diameter: 21.17 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 27.57 mmWheel width: 10.05 mmTotal width (B): 10.15 mmFull scale equivalent rim:20x9.5

Measurements - 1/24 - RearWheel diameter: 21.17 mmPin hole diameter (D): 2.00 mmPin diameter (C): 5.00 mmTotal diameter - Wheel and Tire (A): 27.57 mmWheel width: 11.11 mmTotal width (B): 11.22 mmFull scale equivalent rim:20x10.5

For other scales you can use the scale table below:

1/64 - 37.5% (Not tested)1/32 - 75% (Not tested)1/25 - 96%1/24 - 100%1/18 - 133.3333%1/12 - 200%1/10 - 240%1/8 - 300%

3D printing settings

You can print with a layer height of 50μm, if you want a higher level, with 40μm you will have a better result. Layers smaller than this will make no difference.Other printing details depend on the resin you use and the printer, but do not require special care.