1to32 scale ADDON KIT distant signal for the other trainsignals 3D print model

NOTICE: THIS IS ONLY AN ADDON KIT WITHOUT THE SIGNAL POSTHINWEIS: DIES IST NUR EIN ADDON-KIT OHNE SIGNALPFOSTEN (deutsche Beschreibung unten)

English:If you already bought a kit for one of the H/V signals this one is the add on for the distant signal below the main signal, only consists of the maintenance platform and the shield to support the lights. Scale 1:32 / Gauge1you need:

• 2x 5mm LED in green
• 2x 5mm LED in yellow
• 4x resistor depending on your LED and voltage

I added a sheet of the signs for the Signalposts I just print them on semigloss photopaper and direct glue them with PVA to the post. Only the Distant signal sign (black “X”) I glue on the added 3d print support. I will try to update it from time to time but if you need a special one I haven’t added yet just write me after you bought it and I will add it as soon as possible. For example Speed announcement signsPRINT SETTING:I use ABS like resin mixed with 10-15%vol of a flexible resin, that helps a lot to prevent the parts from breaking because they are so small.layer 0.05mm

If you have any questions write me and I will answer as soon as possible. I would be happy if you rate the Model.Check out my other Models of the signals or railway addons like cable channels. Or have an eye on my Collection to get a discount for the signals in case you need more variants.

Some Pictures are references from my H0 scale Models, which contain a bit less details.Private use only.

Passing on and selling the 3D data or printed models is prohibited!