1946-1966 Ferrari Borrani Wire Wheels
1946-1966 Ferrari Borrani Wire Wheels 3D print model
  • 1946-1966 Ferrari Borrani Wire Wheels 3D print model_0
  • 1946-1966 Ferrari Borrani Wire Wheels 3D print model_1
  • 1946-1966 Ferrari Borrani Wire Wheels 3D print model_2
  • 1946-1966 Ferrari Borrani Wire Wheels 3D print model_3
1 / 4
Useto navigate. Pressescto quit

1946-1966 Ferrari Borrani Wire Wheels 3D print model

Description

Ferrari Borrani Wire Wheel (Replica Rim)

Our rims are designed to a native size of 100mm x 50mm. We pay careful attention to the details of each rim, and replicate them the best we can within the parameters of our design program.

Our rims can be sized using your slicer to suit any scale application and feature thicker faces and outer rims to ensure a solid print (perfect for smaller prints)

We include 2 rims with your purchase… one with a hub and one without. The hub file and tyre are available as a free download.

RIM WITH HUBThis is perfect for printing in 1:64 scale as you can use a .80mm axel or straightened paper clip to attach the wheels. The hub is thicker in size and can be carefully drilled if a bigger hole is required.

RIM WITHOUT A HUBThis is perfect for all other scales where a specialty hub is required. Guides have been added to the rear of the rim to aide you in lining up your hub perfectly!

*Files are provided for personal use only. Please no not resell, share or upload the stl or 3d design.

#ScaleModelWheels

Write comment
Item rating
1 0
F
f1steph
f1steph2025-01-03 12:39:55 UTC
Recommended
Very nice rim. I've had problems printing it tho. The wire are very thin. It was hard not to break the wires while removing the supports. Since there's a lot of wires, they's also a lot of supports close to each others making a big support. With the Anycubic resin , I placed the wire wheel flat and adding supports. I did break a couple wires but once cured with UV, the center of the wheel is strong. I hope it will be strong enough for supporting the car......
1946-1966 Ferrari Borrani Wire Wheels
$5.00
 
Custom No Ai License 
1946-1966 Ferrari Borrani Wire Wheels
$5.00
 
Custom No Ai License 
Sscale-model-wheels-and-design
scale-model-wheels-and-design
(3 reviews)
Response - % in - h
3D Modeling

3D Model formats

Format limitations
  • Stereolithography (.stl) (2 files)26.2 MB

3D Model details

  • Publish date2024-05-15
  • Model ID#5283485
  • Ready for 3D Printing

Similar Models

to 1946-1966 Ferrari Borrani Wire Wheels
Chat