1 to 32 scale COMPLETE SET all signals H V Type DB Signalset 3D print model

This is my complete edition of the H/V Signal-type series.Scale is 1to 32 or Gauge 1.All Signals could be illuminated, these are the needed LEDs (and for every one you would need and resistor corresponding your LED and the operation voltage):

Blocking signal high DB Sperrsignal hoch2x LED 2mm in white2x LED 2mm in red

Blocking signal low DB Sperrsignal nieder2x LED 2mm in white2x LED 2mm in red

Blocksignal1x 5mm LED in green1x 5mm LED in red3x LED 2mm in white

Blocksignal with distant signal DB Blocksignal mit Vorsignal3x 5mm LED in green2x 5mm LED in yellow1x 5mm LED in red3x LED 2mm in white

Combined exit signal DB Kombiniertes ausfahrsignal2x 5mm LED in red1x 5mm LED in yellow1x 5mm LED in green2x LED 3mm in white3x LED 2mm in white

Combined exit signal with distant signal DB Kombiniertes ausfahrsignal mit Vorsignal2x 5mm LED in red3x 5mm LED in yellow3x 5mm LED in green2x LED 3mm in white3x LED 2mm in white

Distant signal DB Vorsignal2x 5mm LED in green2x 5mm LED in yellow

Distant signal with indicator light DB Vorsignal mit Kennlicht2x 5mm LED in green2x 5mm LED in yellow1x 5mm LED in white

Entry signal DB Einfahrsignal1x 5mm LED in green1x 5mm LED in yellow1x 5mm LED in red3x LED 2mm in white

Entry signal with blocking signal DB Einfahrsignal mit Sperrsignal1x 5mm LED in green1x 5mm LED in yellow1x 5mm LED in red2x LED 2mm in red5x LED 2mm in white

Entry signal with distant signal DB Einfahrsignal mit Vorsignal3x 5mm LED in green3x 5mm LED in yellow1x 5mm LED in red3x LED 2mm in white

Exit signal DB Ausfahrsignal1x 5mm LED in green1x 5mm LED in yellow2x 5mm LED in red3x LED 2mm in white

Exit signal with blocking signal DB Ausfahrsignal mit Sperrsignal1x 5mm LED in green1x 5mm LED in yellow2x 5mm LED in red2x LED 2mm in red5x LED 2mm in white

Exit signal with distant signal DB Ausfahrsignal mit Vorsignal3x 5mm LED in green3x 5mm LED in yellow2x 5mm LED in red3x LED 2mm in white

Railroadcrossing flashlight DB Bahnübergangsblinklicht1x 5mm LED in white

For each LED is a suitable Resistor needed, depending on the Voltage/Current Rating and your Powersupply.For the installation to the layout you need a small piece of a 10mm Pipe.I added a sheet of the signs for the Signalposts I just print them on semigloss photopaper and direct glue them with PVA to the post. Only the Distant signal sign (black “X”) I glue on the added 3d print support. I will try to update it from time to time but if you need a special one I haven’t added yet just write me after you bought it and I will add it as soon as possible. For example Speed announcement signsPrivate use only.Passing on and selling the 3D data or printed models is prohibited!

If you have any questions write me and I will answer as soon as possible. I would be happy if you rate the Model.Check out my other Models of the signals or railway addons like cable channels.PRINT SETTING:I use ABS like resin mixed with 10-15%vol of a flexible resin, that helps a lot to prevent the parts from breaking because they are so small.layer 0.05mm

Some Pictures are references from my H0 scale Models, which contain a bit less details.