1 to 32 scale Blocking signal low DB Sperrsignal nieder 3D print model

This is the Model for the Blocking signal or “Sperrsignal” in the lower design. I modeled it from the looks of the Siemens one. I have the high version too. Scale is 1:32 / Gauge 1.Height of the Model is including the concrete foot 29,3mmThe model is illuminable, you will need:

• 2x LED 3mm in white
• 2x LED 3mm in red
• 4x resistor depending on your LED and voltage
• small tube with 10mm outside diameter to install it in the layoutI added a sheet of the signs for the Signalposts I just print them on semigloss photopaper and direct glue them with PVA to the post. Only the Distant signal sign (black “X”) I glue on the added 3d print support. I will try to update it from time to time but if you need a special one I haven’t added yet just write me after you bought it and I will add it as soon as possible. For example Speed announcement signsPRINT SETTING:I use ABS like resin mixed with 10-15%vol of a flexible resin, that helps a lot to prevent the parts from breaking because they are so small.layer 0.05mm

If you have any questions write me and I will answer as soon as possible. I would be happy if you rate the Model.Check out my other Models of the signals or railway addons like cable channels. Or have an eye on my Collection to get a discount for the signals in case you need more variants.

Some Pictures are references from my H0 scale Models, which contain a bit less details.Private use only.

Passing on and selling the 3D data or printed models is prohibited!