Reaver Vulcanic Boom Cannon 3D print model

Upgrade your Titans with a vulcanic boom cannon!

This old school design allows you to upgrade your Titans with an older version of the boom cannon. It features a socket for 5mm magnets and comes presupported.

This is in the package:

• Vulcanic Boom Cannon (plain)
• Vulcanic Boom Cannon (supported)
• Chitubox File for easy adding of supports

I do test print all files on an Anycubic Mono X. However, some machines may require additional supports.

**Note: **This is designed for resin printers. FDM will not work.

Print Info

Reduced lift speed leads to best results when printing presupported files. All files were successfully tested using a lift speed of 45 mm/min. Confirmed successful printing settings by GrimDark Terrain using Anycubic Grey resin with the AnyCubic Mono X:

Layer Height: 0.025mm Bottom Layer Count: 8 Exposure Time: 1.6s Bottom Exposure Time: 30s

Troubleshooting / Failed Prints

If peeling from the build-plate mostly happens due to

• an insufficient bottom layer count or
• bottom exposure time.

Solution: Increase one or both.

If the model's supports fail, the reason for this in most cases is:

• inadequate exposure time or
• lift speed to fast

Solution:Increase exposure time or descrease lift speed or both.

Make sure the environment you're printing in is sufficiently warm. Most resins show best results at 22-25°C.

Regarding pre-supports and scaling.

The supports are designed to be printed at the default 100% scale, I cannot guarantee they will work for re-scaled models.

Of course this is all dependent on printer settings and resin types so please feel free to experiement. For the ease of things I have included the chitubox file for supports.

Unsupported versions of all files are included so users may experiment with their own scales, settings and supports.

You can contact me with any problems or queries at:

email: rudolf@grimdarkterrain.com

Facebook: https://www.facebook.com/GrimDarkTerrain