RC-Racer-Pilot plus Co-Pilot 3D print model

Highly Detailed STL Figure for RC Model Building

This highly detailed racing driver figure and his co-pilot is designed specifically for RC model building.
Despite its impressive level of detail, the figures is optimized for easy printing and requires no supports.

Recommended Printer Type:
Best suited for resin printers, particularly for smaller scales up to approximately 1:10.For larger scales (e.g., filament printing), the figure can easily be scaled up as desired.

For easy scaling!
The list of the most commonly used scales in RC car racing. Based on the supplied 1:6 data

• 1:6= 100% (Data Scale)
• 1:5 = 120 %
• 1:8 = 75 %
• 1:10 = 60 %
• 1:12 = 50 %
• 1:14 = 42,86 %
• 1:16 = 37,5 %
• 1:18 = 33,33 %
• 1:24 = 25 %
• 1:28 = 21,43 %
• 1:32 = 18,75 %
• 1:36 = 16,67 %
• 1:43 = 13,95 %
• 1:64 = 9,375 %
• 1:87 = 6,90 %

Please note!
Any printing results are up to the skill and equipment of the buyer.
No correspondence can be made on issues of customization of the scale and its printability.