Pickle vs Rat 3D print model

Pickle figure fighting rat. This figure has 32 pieces for resin printing because it has small pieces. The size of the figure is 20 cm high. The files are compressed in ZIP with 5 separate folders: Right Weapon, Left Weapon, Base, Pickle and Variants. The compressed OBJ is not for animation, use it only in case you need to export the model to a non-STL format.For personal non-commercial printing.

https://www.artstation.com/artwork/XnBKGn

Warning small and fragile partsAccording to the size of 20 cm, the thickness of the blade of the left arm weapon is 0.1 mm, so printing in PLA can be a problem, resin printer is recommended and extreme care when removing the supports. The total of the piece can be printed at 30 cm to thicken the blade. The pickle body screws are small so it can be difficult to fit them into the body.

Variation piecesThey are optional pieces to print like the arms without wepons, these are in case you have doubts that the arms do not support the rat's head or the weapons. You also have the option of fitting the long rat headless screw but keep away from children who might slip. The variant body of the pickle is to facilitate the painting of the teeth and tongue but they can be very small, if you do not have problems you can print the entire body that is in the Pickle folder.