Industrial Diver Pos 03 3D print model

Highly detailed STL model for 3D printing!

Content of the delivery is a detailed 3D-figure of a contemporary industrial diver as they are used for example on oil platforms and for salvage purposes worldwide.
Contents 2 files: One with and one without flippers.

The supplied 1/10 scale assumes a body height of about 180cm.
However, it cannot be 100% guaranteed that this corresponds to the size of your scene. It may therefore make sense to check the size of your planned scene before printing in order to adjust the figure if necessary.
Body size according to model scale +/- 5-10%

• 1:6 = 290 mm (181.25%)
• 1:9 = 200 mm (125%)
• 1:10 = 160 mm (100%) Original Scale of this Model
• 1:12 = 145 mm (90.62%)
• 1:16 = 120 mm (75%)
• 1:18 = 94 mm (58.75%)
• 1:24 = 75 mm (46.88%)
• 1:25 = 70 mm (43.75%)
• 1:32 = 54 mm (33.75%)
• 1:35 = 50 mm (31.25%)
• 1:43 = 39 mm (24.38%)
• 1:48 = 38 mm (23.75%)
• 1:50 = 35 mm (21.88%)
• 1:64 = 27 mm (16.88%)
• 1:72 = 24 mm (15%)
• 1:87 = 20 mm (12.5%)
• 1:144 = 12 mm (7.5%)
• 1:160 = 11 mm (6.88%)
• 1:220 = 8 mm (5%)
• 1:350 = 5 mm (3.12%)

Recommended printer type:
SLA resin printer from very small to approximately 1:10 scale.
Of course, the figure and all required parts can be scaled up to a higher scale as required for FDM printing with filament.

Please note!
Any printing results are up to the skill and equipment of the buyer.
No correspondence can be made on issues of customization of the scale and its printability.
The price of this high quality models is not negotiable.