Flexi Cupid Love Dragon EASY TO PRINT with no supports 3D print model

This dragon comes in two versions: ** one with smaller hooks suitable for larger prints and very durable materials, and the second version, more versatile and easier to print due to larger hooks and sleeker wings. Intended as a decorative item, this dragon is a joy to print—guaranteeing excellent results even for novice printers, as it's designed to require no supports. Each layer self-supports progressively, eliminating the need for additional adhesion methods like brims. While supports are not necessary, I recommend using glue for added security. Simply apply a bit of glue, print, and once finished, remove it from the bed hassle-free, without unlocking pieces or detaching supports. Have fun! Feel free to adapt it if you want to share a special make! You will get a royalty free licence: feel free to print also for commercial use! **My favourite print config:

• Creality Print Slicer
• Creality K1 Max FDM printer (GCODE INCLUDED!)
• Red Hyper PLA Creality Filament

Quality

• Layer Height 0.10mm
• Line Width 0.45mm

Shell

• Hide Z Seam Yes
• Wall Thickness 0.87mm
• Top/Bottom Thickness 0.80mm

Infill

• Infill Pattern Grid
• Infill Density 15.00%

Speed

• Print Speed 300.0mm/s
• Initial Layer Speed 60.0mm/s
• Travel Speed 500.0mm/s

Temperature

• Nozzle 220.00°C
• Bed 45.00°C

Travel

• Enable Retraction Yes
• Retraction Distance 0.50mm
• Retraction Speed 40.00mm

Support

• Generate

Support NO