BOUNTY HUNTER BUST DOTA 2 3D print model

DOTA 2 'BOUNTY HUNTER' BUST AND STAND STL FILES FOR 3D PRINTING. I WANTED TO DO A COLLECTABLE SET FOR THIS POPULAR GAME, I PLAN TO ADD MORE CHARACTERS IN THE FUTURE, AND IF IT TURNS OUT TO BE POPULAR; I'D LIKE TO DO COLLECTABLE SETS FOR OTHER GAMES AS WELL. I'VE SCALED EACH CHARACTER IN REFERENCE TO EACH OTHER, SO THEY LOOK IN CORRECT PROPORTION WHEN THEY'RE DISPLAYED TOGETHER; INSTEAD OF ODD OR RANDOM DESIGNS.

3D PRINT SETTINGS:

ALL FILES ARE CLEAN AND READY TO GO, ALL OF THE MESH'S HAVE BEEN RUN THROUGH MESHMIXERS 'ANALYSIS/INSPECTOR' TOOLS TO FIX ANY BAD TOPOLOGY AFTER SCULPTING; AND ALL OF THE STL FILES WERE GENERATED WITHIN MESHMIXER.

1. THE STAND AND BUST ARE SEPARATE STL FILES

   1. THE STAND SIZE IS 100MM CUBED
   2. THE BUST SCALE IS AN AVERAGE OF 150MM WIDE X 160MM HIGH, BUT VARIES DEPENDING ON THE ANATOMY OF EACH INDIVIDUAL CHARACTER FROM THE COLLECTION.
   3. YOU CAN PRINT ON WHATEVER SETTINGS THAT YOU PREFER.
   4. I PERSONALLY LIKE TO PRINT WITH AN UPRIGHT MODEL SO THE LAYER LINES ARE LESS NOTICEABLE ON FEATURES LIKE THE FACE. THIS WASTES MORE SUPPORT MATERIAL, BUT I THINK IT’S A SMALL PRICE TO PAY FOR A BETTER FINISHED MODEL. I ALSO WIND THE SPEED DOWN BY AROUND 20%.
   5. I USUALLY PRINT AT A LAYER HEIGHT OF 0.2MM with a 0.4MM NOZZLE, AND WITH AN INFILL OF ONLY 5-10% WITH 2 PERIMETER LAYERS.

   I ALSO PRINT WITH MY SUPPORT SETTINGS ON: a. SUPPORT SPACING= 4MM b. 2 INTERFACE LAYERS AT 0.4MM c. SEPARATION LAYER AT 0.8MM THIS ALLOWS FOR THE EASY REMOVAL OF SUPPORT MATERIALS.

   1. I USE A PRUSA I3 MK2S. AND I LOVE IT.