3D printed model for making silicone mold for creating bricks 3D print model

This printing model is designed specifically for the printer that prints with eboxy resin. It maximizes the space available on the work surface.The model is designed for multiple filling of silicone molds. The edges are removable for easy pulling of the silicone mold.

The additional walls are fixed on ordinary black colored metal paper clips.

All model sizes are valid.

How to print:

For a good print, you must add hollows to the mold and place it on the printing platform at an angle of approximately 45 degrees. Printing was tested at a layer height of 0.05 mm.