Seal ring with the letter O with gems of 2 mm each 3D print model

Seal ring with the letter O with gems of 2 mm each.

Attention: This model is delivered in STL and Obj format.

This piece was designed so that the person can wear the model without discomfort on the finger.

So that the card fits very well and the body does not bother in its portability.

This model comes with 3 files to download in stl and obj format. 1 simple one that I stamp without cutting and without molding. 1 simple stamp with raw stamping with rhinestones 1 stamp with stamping cut to size with stamping and rhinestones.

Characteristics of the stamp Letter O:

Different weights depending on the metal chosen.

18kt yellow gold: 12.08 gr.

18kt red gold: 11.68 gr.

18kt white gold: 11.37 gr.

14kt yellow gold: 10.73 gr.

14kt red gold: 10.13 gr.

14kt white gold: 11.35 gr.

Platinum 950: 16.93 gr.

925 silver: 8.05 gr.

950 silver: 7.93 gr.

Size: 19

Diameter: 18.78

Gems: 2 mm diameter each one.

If you are interested in another typography write me. Success

This piece is delivered in stl and obj format as follows: one file with the complete stamp, and another file with the stamp cut and shaped to size.

Everything here designed is tested in my 3d printer before releasing any type of file, guaranteeing the correct functioning of each of the models.

If you have any doubt, or you want any kind of special part, don't hesitate to ask me.

If you want any special modeling you can contact me privately.

Good luck and I'm glad you are here.

Remember that all this modeling is made and tested in my studio for you. Everything shown here is made in my own studio. That way you will always get new and updated models.

Whether for personal or professional use.

enjoy this piece