Orc Skull Ring 3D print model

3D model is fully ready for 3d printing of plastic, metal or jewelry wax! Orc Skull Ring, Formats available .stl .obj .fbx .mtl .zpr Recommended material - oxidized silver.

The inner circle diameter is 2.2 centimeter

The model is 3d printed to test the printablity.

For best results print with the print settings mentioned below (below mentioned settings apply to all kind of printers and printing material, For best possible print use SLA printers Layer height - 0.04 mm Infill density - 30 % Infill pattern - zigzag outerwall speed - 20 mm per second inner wall speed - 35 mm per second support overhang angle 50 degrees flow 100%