Demo collection Infinity Rings US7 3mm GEM 3D print model

Demo collection shows a special case of setting program parameters.

Five designs, from 1 to 5 lines of top diamonds.

One ring size (US7 - 17.4mm) and 1 diamond size (Top 3mm and side 2.5mm) The number of diamonds in one line is 23 pieces.

You can buy the full program from the link - https://www.cgtrader.com/3d-print-models/jewelry/rings/program-for-parametric-modeling-infinity-rings-any-size (Or short link - https://clck.ru/ar8XF)

I made a Bonus collection for people who want to test models and try printing before buying the main product - parametric modeling programs of all options and sizes.

The objective of the project is to create an infinity ring with multi-sided setting of diamonds for 3D printing in resin and subsequent casting in metal.

Problem solving (what pain the program relieves):

1. Saving 70-90% of the time, you get either a blank with diamond markings, or a finished ring in which you just need to set the diamonds and polish.
2. The program does all the calculations and the user sees the result.
3. You can print 10-40 blanks at once and also cast several rings at once. And then just set the diamonds.
4. The appearance of the ring can be seen 5 minutes after the start of entering the parameters, and show it to the customer. The program provides a model for visualizations that can be used to create a catalog.
5. You do not need to search for a model, you enter the initial parameters and get a finished model for 3D printing and visualizations.
6. The program automatically makes all the cutting steps similar to those that a jeweler does with his hands, with an accuracy inaccessible to a person.
7. When casting a 3D model, the human factor tends to zero, the main thing is to carefully set the diamonds and polish the product.
8. The program gives accurate results of the volume of workpieces, which are multiplied by the specific gravity of the metal and get accurate data on the weight of the workpiece and the required metal. Supports and accessories are easy to remove, assemble and recycle.
9. The table also displays data on the size and number of diamonds, which gives an understanding of the cost of the finished product.

If you have any questions you can always send me a direct message.