Corsage Ring 3D print model

Very similar to a real corsage, this ring sits firmly on the finger because of its width. If a ring size 58 fits you a bit tight with narrow rings or you tend to have fluctuating finger thicknesses, you should scale the model 1-2% larger.

There are two versions of the model. One with and one without the lacing. The version without lacing can be varied according to your taste and you can choose what kind of ribbon you want to thread in what color. The tape should be no more than 1mm thick. A soft leather strap or a paracord cord are super suitable.

The ring is 17mm wide at the top and 9.5mm at the bottom. The narrowest detail are the bars between the holes with a width of 0.8mmx1.5mm. The volume of the model without lacing is 1612 cubic millimeters, with cord 1706 cubic millimeters. You can scale this ring to fit your finger. Suitable for 3D printing (such as sls, sla, fdm) and wax casting. The ring looks very nice in silver with antique finish.

As a skilled goldsmith with a design degree and years of experience in 3d modeling I make sure every model is perfect. If my designs inspire you contact me for your personal ideas.