kinetic horror eye lip spider pendant 3D print model

When you move, the arms around the eye mouth move and look like shaky spider legs or crab legs. At the same time, the eye stares at you unblinkingly and wants to kiss you.

The eye with lips is 20mm wide and 25mm high. With arms it is about 30mm wide. The model consists of the eye and the eight arms. You need them in the following quantity: Tentacle-narrow.stl - 2 piecestentacle-wide.stl - 6 pieceseye2.stl - 1 pieceThen you thread a paracord string with a maximum diameter of 1.5mm from the top into the middle hole and through the next one to the outside. There you thread the string through the eye of the first tentacle and back into the eye. Each tentacle is rotated 90°. I recommend using the narrow arms for the corners of the mouth, but so that it doesn't become too symmetrical don't position them opposite each other. This 3D model is suitable for production in lost wax metal casting, but also for all 3D printing variants like fdm, sls or sla. Especially pretty is the pendant in silver with antique finish.

As a trained goldsmith with years of experience in 3D design, I work with great care. If something does not fit, please feel free to contact me.

If my designs inspire you contact me for your personal ideas.