James Webb Space Telescope JWST Pendant 3D print model

Without forgetting the wonderful Hubble Telescope, its successor the James Webb Space Telescope presents itself here as a pendant for all fans of science. With great anticipation for all the images and findings to come.

In diameter, the main mirror of the pendant measures 40mm with a thickness of 1.5mm. Overall height of the pendant 41.5mm, width 37mm and 44mm depth. Despite the protruding rods (cross-section 1.5x2mm each), the pendant does not tilt forward. This is done by the massive sensor part in the middle of the mirror. The two eyelets at the back reduce lateral tilting. The inner dimension of the eyelets is 3.5mm. Volume of the model: 2160 cubic millimeters. Suitable for 3D printing (such as sls, sla, fdm) and wax casting.Because of the rods I point out that not every foundry will produce this object in metal, but it meets the requirements of the known suppliers.

As a trained goldsmith with years of experience in 3D design, I work with great care. If something does not fit, please feel free to contact me.

If my designs inspire you contact me for your personal ideas.