Subaru Keychain 3D print model

Simple Subaru Logo for making your own keyring or necklace.

The model is 4mm Thick.

Keychain in render for size visualization.

3D printing settings

Made on a Bambu Lab X1 Carbon.

Prusa Neon Green PETG.

0.6mm Nozzle0.3mm Layer Height15% Infill245°C First Layer250°C Other Layers70°C Bed Temp

Recommended Temp for Material is:Nozzle - 250 ± 10°CBed - 80 ± 10°C

I used 'Generic PETG' in the settings for slicing and used all the defaults, but did change the nozzle temp slightly (see above).

You aren't limited to the colour I used, any PETG Colour will work. I recommend using glue to ensure it sticks on the first layer.

Also the default infill is 15%, but you can use more, it'll make the model stronger to suit your lifestyle.