Valorant Skye Necklace 3D print model

3D model descriptionAvailable formats: STL and OBJ

This 3D printable model replicates the iconic necklace worn by Skye in Valorant. The model is designed with both full model and burst model options, allowing for easy customization and assembly. The burst model separates the necklace into three main components: the leaves, connector, and marbles.

Leaves: There are two uniquely sized leaves with a textured surface that reflects Skye’s nature-inspired aesthetic.

1st Leaf: 6.0 cm x 9.2 cm x 1 cm2nd Leaf: 6.0 cm x 11.1 cm x 1 cmConnector: A small, discrete piece to join the leaves, sized at 2.2 cm x 3.2 cm x 0.9 cm.

Marbles: The necklace has 50 individual marbles, each measuring 2.1 cm x 2.1 cm x 1.4 cm. Each marble has a hole through the center, allowing you to string them together with ease for an authentic look.

The necklace’s design ensures that each piece fits well when assembled, making it perfect for cosplay, display, or as a collectible item for Valorant fans.

3D printing settingsGeneral Settings

Layer Height: 0.1 - 0.2 mm for good detail, especially on the leaves and marbles.Wall Thickness: 1.2 mm (3 walls) for durability, as this will ensure the parts are sturdy while keeping them lightweight.Infill Density: 20-30% for the leaves and connector; marbles can be set to 15-20% as they don’t bear much stress.

MaterialMaterial: PLA or PETG recommended for ease of printing and durability.

Print Temperature:PLA: 190-210°CPETG: 230-250°C

Bed Temperature:PLA: 50-60°CPETG: 70-80°C

Print SpeedPrint Speed: 40-60 mm/s to maintain detail on the leaves and marbles.Travel Speed: 120-150 mm/s to minimize stringing and ensure smoother prints.

SupportsSupports: Only for the marble and leaves (if they have overhangs). Use tree supports or custom supports to minimize material waste and simplify removal.Support Density: 10-15% to balance support effectiveness with ease of removal.

Additional SettingsBuild Plate Adhesion: Use a brim or skirt to ensure proper adhesion, especially for the larger leaves.Retraction: 5-6 mm retraction distance at a speed of 30-45 mm/s (depending on your printer) to reduce stringing.Post-Processing TipsAssembly: After printing, thread a durable string or elastic cord through the marbles to create the necklace.Sanding: Light sanding may be required on the leaves to smooth out any visible layer lines.Finishing: You can paint or coat the pieces for an even more authentic look if desired.