Wall Plant Pots Collection 3D print model

Commercial License:You can print and sell these models.

Total available 9 models. The models are available with and without drain hole.Youtube video link: https://www.youtube.com/watch?v=HS-pPBswFfw3D printing settings:

Printer: FDM / RESIN,

Filaments: PLA, PETG, ABS, E.T.C,

Retraction: 4mm speed 60,

Nozzle Temp: minimum 190 to 210 C bed 90 C for PLA (no glue stick/adhesive needed)

Infill: Minimum 8%,

Print in place,

Support: No supports needed, if necessary, turn on make overhang printable.

Ignore watertight error,

Layer height: 0.24, (use high diameter nozzle for fast printing)

Build plate adhesion: brim at least 10mm,

Thank you,Have a cute day.