Self Watering Planter STL File for 3D Printing 3D print model

Self Watering Planter STL File for 3D Printing | 2 pieces - Outer Shell and inner core | Sculptlife3d

Files Included :

1. Outer_shell - With 2mm thickness and without thickness
   
2. inner_core

This Self watering planter consist of two parts -

1. OuterShell - It acts as a water reservoir which holds water .
2. Inner core - This act as storehouse for your soil and plant and base has slots which allow water to be absorbed by soil as per plant's requirement.

The assembly is a tight fit so if you need bit loose assembly, Kindly reduce overall diameter of inner core by 1mm or as per your requirement.

Outer shell :

Height = 88.1 mmDiameter = 151 mm

Inner core :

Height = 106mmDiameter = 115mm

NOTE: These files are for PERSONAL use only. You may not copy, reproduce, share, or transfer any of the files or graphics to a third-party.

This is Not a Physical Object . This is an STL file for use with 3D printers; not a physical item. You will need a 3D printer and slicing software to use this file