BIRD FEEDER PIPE 3D print model

Here is a feeder to hang to distribute seeds to birds.

Composed of a tube shaped body, it will decorate beautifully.

No support is required for manufacturing.

The opening and perch must be printed three times.

The high and low plot twice each.

The assembly is very simple.

Each element mounted on the vertical tube is held by a stud that can be turned a quarter turn to lock it.

3D PRINTING SETTINGSExtruder: 200°C and bed: 55°C

Layer height: 0.2 mm

Vertical hulls, perimeter: 3

Horizontal hulls, solid top layer: 3 and bottom layer: 3

Filling density: 20%.

no support required

Speed perimeters: 30 mm / s