Ocracoke Lighthouse 3D print model

The oldest of the current lighthouses on the Outer Banks of North Carolina, this replica of the 1823 harbor light on Ocracoke Island is beautiful in its simplicity. At 11 inches tall, the model includes a 4.75 inch base and an internal light that permeates through the interior. The cool, white 20 lumen LED candelabra bulb utilizes only 2.2 watts of electricity. With an eight foot, switched electrical cord, this light may be utilized as a lamp or as a nightlight with a multicolored, LED candelabra bulb option.

Notes: 1. 1/100 scale model of the lighthouse located in Ocracoke, NC. 2. The oldest of the current lighthouses on the Outer Banks of North Carolina, this replica of the 1823 harbor light on Ocracoke Island is beautiful in its simplicity. At full assembly, it stands at 11 inches tall with a 4.75 inch base. 3. Recommended Filament Color(s): White for Cylinders A and B; Black for the Gallery/Light/Top Ring. 4. Recommended Print Settings: The Gallery/Light/Top Ring component should be printed at an extrusion speed of 20mm/s for the best detail. This translates into a Fine or Detailed setting if streaming. The streamed files follow this order: Cylinder A, Cylinder B and Gallery/Light/Top Ring. 5. Other Assembly Components: Two-inch candelabra socket, eight inch white cord set w/switch and LED candelabra bulb (see pics or [Assembly Instructions](http://www.outerbankslights.com/wp-content/uploads/2014/12/Ocracoke_Lighthouse_Assembly.pdf)).