MILLENNIUM FALCON LIGHT 3D print model

This is the wall/hallway light in the Millennium Falcon accurately recreated in 3D. Derived from the Coughtrie SW10 light. I have included the original version along with a base and diffuser where you can light it internally. Also included is the Disney's Smuggler's Run Ride version which is basically the same, except with 3 extra holes between the cut outs.

The parts, especially the hub, is highly detailed and a large file. No facetting.

You will need 3 small screws to put this together. If you intend to use the base, you can use reflective tape on the bottom and illuminate it with a regular LED light bulb. Print the diffuser with a translucent medium of your own choosing.

This is designed to print with a minimum of support. Part 1 may require some internal support.

The largest part, the base, is 236mm W x 250mm L.