BLOODBORNE- LANTERN FROM THE GAME 3D print model

I tried to make a flashlight for FDM printing and I succeeded!I wish all fans of this wonderful game to do the same, since this interesting moment can now be placed on your table)The platform design is completely mine, and everything else is taken from the game! The lantern is equipped with various illumination, both in the lamp itself and in the platform. And the site is filled with epoxy, as if there is a crack and light from the ground is coming to the ghosts! This has an amazing effect!I have provided both a 12-volt and a 9-volt krone platform to keep it fully portable.Attention! The 40cm high model gives good print quality on FDM printers !!!

This model, together with the platform, will be 40cm.This is how I was typing:lantern bottom - infill-50% soplo 0.1

lantern top - infill-50% soplo 0.1

lantern-ribs6IN1- infill-50% soplo 0.1

chain2leg-top - infill-30% soplo 0.2

leg-bottom - infill-30% soplo 0.2

bell-3 - infill-30% soplo 0.2

bloodborne - infill-30% soplo 0.2

12volt power supply- infill-30% soplo 0.2

button2tact

button2tact1candle

casing 2crone

coverKrone - infill-30% soplo 0.3

coverKrone2

nimbus-ring - infill-30% soplo 0.2

chain - infill-30% soplo 0.2

Relief - infill-30% soplo 0.2